MBRP S5400 - Manual (Page 3)

S5400 © 12/07 PAGE 3 OF 4
Installation of MBRP Inc. Performance Exhaust:
1. Install the Extension Pipe over the cut exhaust pipe using a 2.5”
Band Clamp. Refer to Figure 5.
2. Slide a 3.5” Band Clamp over the Extension Pipe and install the
Muffler onto the Extension Pipe. Refer to Figure 6. See the illustration
on Page 1 for the exhaust flow direction.
3. Slide a 3.5” Band Clamp over the outlet side of the Muffler. Position
the Over Axle Pipe over the axle and loosely attach it to the Muffler.
Install the Over Axle Pipe hanger into the factory rubber insulator. Refer
to Figure 7.
4. Slide a 3.5” Band Clamp over the Tail Pipe and install onto the Over
Axle Pipe. Refer to Figure 8.
5. Slide the Tail Pipe hanger into the rearmost rubber insulator and
reattach to the frame. Refer to Figure 9.
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9