MBRP S5048 - Manual (Page 2)

S5048 © 03/13 PAGE 2 OF 4
2004-2009 Chevy Colorado, GMC Canyon
Note: This System requires spare tire removal
Removal of Stock System:
1. Apply a penetrating lubricant liberally to all exhaust fasteners,
hangers and rubber insulators.
2. Cut the exhaust in front of the muffler so that it can be removed
from the vehicle. Refer to Figure 1.
3. Remove the nuts from the studs holding the front flange together
and disconnect the exhaust system. Refer to Figure 2. Do not
discard the nuts as they are required for the installation.
4. Remove the hangers from the rubber insulators. Remove the
exhaust from the vehicle. Refer to Figure 3.
5. Remove spare tire from the vehicle and relocate.
Installation of MBRP Inc. Performance Exhaust:
1. Install the Extension Pipe to the existing flange using the
fasteners provided. Refer to Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4