MBRP CFGX013 - Manual (Page 4)

FGX012/CFGX013 © 09/13 PAGE 4 OF 4
8. Install the Gasket and attach the Down Pipe to the 3” Extension Pipe (or the
factory exhaust).
Refer to Figure 9.
9. Re-install the cross member.
10. Align the exhaust as required. Starting at the front of the exhaust, tighten all
clamps, hangers and connections. Ensure each joint is secure.
11. Check along the entire length of the exhaust system to ensure that there is
adequate clearance between the exhaust system and heat shields, cross members,
and body panels.
12. Raise and re-attach the under car engine cover.
Congratulations! You are ready to begin experiencing the improved power, sound and driving experience of
your
MBRP Inc.
performance exhaust system. We know you will enjoy your purchase.
Figure 9