Hootoo HT-IP006N - Manual (Page 22)

Security Solutions Partner
22
RECOMMENDATION:
Image PT function: Image PT function is recommended, you can control the camera direction on the live
video. Double click the right mouse on the live video to enable this function, and you will see a white &
transparent arrow on the live video, left click to control direction, eight directions are available. This is
very convenient for Pan/Tilt operation.
Double click right mouse again to exit.
Preset Settings
Figure 4.5
: Set Preset Position. It supports 8 preset positions. First, control the camera rotate to the desired position
you need to set, click the Set Preset Position button , it will pop-up a dialog frame(Figure 4.5), choose
any number (1-8) you want to set it to.
NOTE: Set different positions with the same number, camera will record the last position setting only.
: Call Preset Position. It supports 8 preset positions. If operator wants to monitor an important area quickly
and precisely, just click Call Preset Position button , it will pop-up a dialog frame(Figure 4.5), choose the
number, then camera will rotate to the preset area automatically.
If you want to use Call Preset Position, you have to Set Preset Position first.
NOTE: For Operator, if you click other menus which operator don’t have the right to operate it, there will be a
pop-up of login interface (Figure 2.6), please input the user name / password for at least 3 times to login again.
2.9 For Administrator
Details see Settings as Administrator (details3.1-3.22).
.
3 Settings as Administrator
When logged in as Administrator, you can enter the IP Camera for Administrator.
Administrator supports all the settings and operations of the camera; you can set and control it freely
There are some special functions only for administrator, as shown below: