Hootoo HT-UD01 - Manual (Page 27)

© DisplayLink 2014 – Issue 1 Page 27
DisplayLink USB Graphics User Manual
Software Version 7.6
Choose the Advanced Tab
5.2. Configuring the adapter MAC address
By default, every DisplayLink Ethernet adapter has its own unique layer 2 MAC address. This MAC address will be used
by default, if the option Not Present is selected. The MAC address can be changed in the advanced properties.
To change the MAC address, Select the Value option and enter the new MAC address in the format XXXXXXXXXXXX,
where X is a hex digit between 0 and F.
Click OK to apply the change