Hootoo HT-UD01 - Manual (Page 10)

© DisplayLink 2014 – Issue 1 Page 10
DisplayLink USB Graphics User Manual
Software Version 7.6
4. Connect your DisplayLink device via the USB cable to your PC.
A message will be shown that DisplayLink software is configuring itself for first use:
5. The screen should flash and the DisplayLink device should start to extend the Windows desktop.
Note: On some machines you may need to reboot before you can use your DisplayLink enabled device.
During installation, a compatibility check is run on your system. Any potential issues found will be alerted to the user.
3.2. Windows 7
The preferred method of installation is using Window 7’s Windows Update facility.
To Install the DisplayLink USB Graphics on Windows 7
1. Connect your DisplayLink device via the USB cable to your PC.
Windows detects the new hardware and automatically downloads the driver.
2. Once downloaded, the install will run
The DisplayLink software end user licence agreement window opens.