Fantasea Line M67 Mark II BigEye Lens User Manual
Page 6

6
doesn't reflect on the BigEye Lens), or if you choose to position the strobe
behind the camera housing, make sure it's not pointed directly
towards the lens, but a little bit tilted towards the side.
6. Care & Maintenance
A. Please use the utmost care and do not use excessive force when assembling and
disassembling the different accessories, in order not cause any damage to the
product.
B. Keep the BigEye Lens away from extreme high temperatures, as under direct
sunlight, since it might damage the O-ring and interfere with the watertight seal
of the lens.
C. Do not clean the lens with any chemical solvents or other materials, which might
cause damage to the plastic dome.
D. Never look at the sun through the lens.
E. When storing the lens and during transportation, make sure that it is properly
protected in order to prevent scratches, cracks or any other damage to the lens.
F. After Dive Care:
I.
Detach the BigEye Lens from the housing lens port and rinse all lens
components in fresh water.
II.
To ensure that the accumulated salt has completely dissolved, it is
recommended to soak the lens in warm fresh water once in a while.
III.
Wipe the water drops with a soft cloth. Do not leave any droplets to dry on
lens surface, as permanent water spots may remain.
IV.
Store the lens in a dry and protected area. Storing the lens in a low
humidity environment will decrease the chances of the lens fogging up
when submerged in water.
V.
Do not store the lens in presence of chemicals, solvents or fuels.