Fantasea Line M67 Mark II BigEye Lens - Manual (Page 3)

3
3. Included in Packaging

BigEye Lens M67 Mark II

2 x Lens Covers (front and rear)

Warranty

Instruction Manual
4. Specifications

Features a 67mm thread mount

Depth rated to 50 meters / 160 feet

Magnification (angle of coverage recovery): 0.75X (100%)

Lens material: Hard coated plastic dome and aero grade aluminum alloy

Weight (on land): 203g

Dimensions: Ø 118mm x 32mm (D)
: 5. Instructions for Use
A. Please use the utmost care and do not use excessive force when assembling and
disassembling the lens, in order not to cause any damage to the product.
B. During the dive, install the BigEye Lens by screwing it on to your housing lens
port, as shown on the figures on the following page.
Important Notice:
The BigEye Lens should only be screwed till the point of minimal resistance.
Continuing to screw the lens further than this point will make it difficult to
remove it later on. If this happens, in order to remove the lens, please use a
slight amount of pressure against the dome or plastic protector wings by
pushing in and turning counter clockwise at the same time.