Equus 3100 - CanOBD2 Diagnostic Tool - Manual (Page 11)

About the Diagnostic Tool
ADJUSTMENTS / SETTINGS AND DTC LIBRARY
OBD2 9
If a definition for the DTC you
entered is not available, an
advisory message shows on the
Enhanced CanOBD2 Diagnostic
Tool’s display.
4. If you wish to view definitions for additional DTCs, press the
ENTER/FF button to return to the DTC Library screen, and
repeat steps 2 and 3.
5. When all desired DTCs have been viewed, press the ERASE
button to exit the DTC Library.
Selecting the Display Language
1. Use the UP and DOWN buttons,
as necessary, to highlight Select
Language in the MENU, then press the
ENTER/FF
button.
„ The Select Language screen dis-
plays.
„ The currently selected display Language is highlighted.
2. Press the UP or DOWN button,
as necessary, to highlight the desired
display language.
3. When the desired display language is high-
lighted, press the ENTER/FF button to
save your changes and return to the MENU
(shown in the selected display language).
Setting the Unit of Measure
1. Use the UP and DOWN buttons,
as necessary, to highlight Unit of
Measure in the MENU, then press the
ENTER/FF
button.
2. Press the UP or DOWN button,
as necessary, to highlight the desired
Unit of Measure.
3. When the desired Unit of Measure
value is selected, press the ENTER/FF
button to save your changes.