Other features – AltiGen comm AltiServ TM 4.5 User Manual
Page 29
22
AltiServ User Guide
Other Features
2
These features require a Triton Resource Board and system settings that allow
monitoring and barge-in.
Feature
Dial
a
a
phone number, including trunk or route access code
Description
Feature Status
Check
#22
Retrieves an announcement about currently
activated telephone features. In addition, the
dial tone changes when the following features
are activated: Do Not Disturb, Call Forward-
ing, Remote Call Forwarding, Hands-Free
Mode, Dial Tone Mute Mode, Outside Call
Blocking (Operator only) and Operator Off-
line (Operator only).
Station Speed Dial
Setup
#25
Program a station speed dial phone number
assigned to a 2-digit dialing number between
00 and 19. The phone number can be up to 20
digits, and must include all necessary digits
such as outside line access digit, 1 for out of
area numbers and the area code. When you
have finished, press #.
Hang up when done, or you can continue to set
up other speed dial numbers by pressing #
again.
Overhead Paging
#44
If available on your system, connects to the
overhead broadcast device. Speak into the
handset and hang up when finished.
Overhead Paging
by Trunk
#45
If available on your system, directs a call to a
particular trunk with a paging ID broadcast.
Allows broadcasting through a trunk without
checking call progress.
Feature Tips
#55
Plays helpful tips and reminders for optimal
use of AltiServ. There are eleven tips total and
a different one is played each time you access
Feature Tips. See “Feature Tips” on page 13
for more information.
Silent System Call
Park
#73
Disable the system from announcing the
“location” of a call when using the System
Call Park feature. See “System Call Park and
Silent System Call Park” on page 7.