Bell Bike Faction/Fraction Multi-sport - Manual (Page 5)

6 7
the forehead, it doesn’t fit correctly. repeat steps 2 and 3 until the
helmet movement is minimal.
warning: if you cannot adjust the helmet to fit properly according to
step 5, Do not usE this hElmEt. replace it with a different size or model.
return it to your dealer or contact Bell
® for assistance.
once you are satisfied that the helmet fits correctly and that all straps
are properly adjusted and tightened, take a short test ride. pay attention
to overall comfort and helmet stability while riding. make any minor
adjustments to the fit pads and straps to improve comfort or stability.
HelMets witH Visors
if your helmet comes with a visor, please note it is
removable. to remove it, gently tug on the visor until
it releases (Figure 7). it is attached by friction only (no
screws, pins or clips) so to put it back on please line up
the tabs on the visor so the center tab is in between the
front two vents on the helmet (Figure 8).
caring For Your HelMet
cleaning: helmets can be damaged by many available
cleaners, especially petroleum based solvents. clean
the helmet using a soft cloth or sponge, warm water
and mild soap.
storage: Excessive heat can damage the helmet. in direct sunlight,
dark gear bags and automobile trunks can get hot enough to cause heat
damage. Damaged helmets will appear to have uneven or bubbly surfaces.
warning: Do not use heat damaged helmets.
warranties
Bell
® warrants to the original purchaser of this product that the product is
free of defects in material and workmanship for a period of one year from
the original date of purchase. this warranty does not apply to defects of
physical damage resulting from abuse, neglect, improper repair, improper
fit, alterations, or use unintended by the manufacturer.
if your Bell
® helmet is found to be defective in materials or workmanship
within one year from the date of purchase, Bell ® or the country distributor
will at its sole option either repair or replace the helmet free of charge. Just
take it to your retailer, with a letter indicating the specific reasons you are
returning the helmet, and proof of date of purchase. the retailer will then
evaluate the claim. Bell
® does not warranty any helmet damaged due to
heat or contact with solvents. this warranty does not affect your statutory
rights. this warranty is in lieu of all other agreements and warranties,
general or special, express or implied and no representative or person is
authorized to assume liability on behalf of Bell
® in connection with the sale
or use of this product.
Figure 7
Figure 8