Ashland I-180TS - Manual (Page 17)

7
ITEM QTY PART NUMBER DESCRIPTION
A Bowl and frame assembly
0 AFB-00094 Flanged Bolt: /8” NC x ” long
A69-L Left side dirt shield
4 A69-R Right side dirt shield
5 A508 Bushing: -/8” OD x ” ID x -/4 Lg.
7 A55 Corner cutting blade, “L” shape, reversible,
” x 6-/” L & R
Each blade requires: (6) 1” x 2-3/4” plow bolts, (2) 1” x 2-1/2” plow bolts, (8) 1” NC nuts
A50 Left & Right Straight Corner Blade w/6 x -/4 plow
bolts & nuts each, 6 per side
8 1 A123356SER (stardard) Center blade, Serrated Both sides, Reversible
A56SER Center blade, -side Serrated & -side Straight
A56 Center cutting blade, reversible, Straight,
Blade Diamensions. 6” x 54-/4”
A507* Center blade, 8” Straight, reversible
A507-SER* Center blade, 8” dbl serrated, reversible
A507-SERTC* Center blade, 8” dbl serrated w/ -pass
Tungsten/Carbide imbedding - reversible.
Blade Dimensions. 8” x 54-/4’’
Blade requires: (9) 1” x 2-3/4” plow bolts, (9) 1” NC nuts
0 PBP-NC-00-075 Plow bolt: ” NC x -/4” long
5 AFN-000 Nut: ” NC
A57 Bank shaver/router bit, reversible, L & R
Each blade requires: (5) 1” NC x 3” long bolts, (5) 1” NC nuts
4 PBP-NC-00-50 Plow bolt: ” NC x -/” long
14 10 AFB-0018 Bolt: 1” NC x 3” long (5 per router blade)
5 4 AFB-00067 Bolt: -/4” NF x 7-/” long
6 4 AFN-000 Nut: -/4” NF
7 A-65 Axle mount
8 A5 Lift cylinder pin
9 A-09 Main frame pin
0 A58 Flanged bolt bushing
AFB-00079 Bolt: 5/8” x /” long
A-98 Pins
A-89 Pin Keeper
* Optional Center Blades
I-180 BOWL AND FRAME PARTS LIST