American Fibertek SM8P-SFP - Manual (Page 342)

Rev.A1
18-May-11 300
1 DISCARDIN
G
2000000 128 No Auto
2 DISCARDIN
G
2000000 128 No Auto
3 DISCARDIN
G
2000000 128 No Auto
show config
Syntax:
show config
Description:
To display the configuration of STP.
Argument:
None.
Possible value:
None.
Example:
SM8P-SFP(stp)# show config
STP State Configuration :
Spanning Tree Protocol : Enabled
Bridge Priority (0-61440) : 61440
Hello Time (1-10 sec) : 2
Max. Age (6-40 sec) : 20
Forward Delay (4-30 sec) : 15
Force Version :
RSTP
show port
Syntax:
show port
Description:
To display the port information of STP.
Argument:
None.
Possible value:
None.
Example:
SM8P-SFP# stp
SM8P-SFP(stp)# show port
Port Port Status Path Cost Priority Admin Edge Port Admin Point To Point
==== =========== ========= ======== =============== ====================
……
show status
Syntax:
show status
Description:
To display the status of STP.
Argument: