American Fibertek SM8P-SFP - Manual (Page 319)

287 Rev.A1
18-May-11
6 Down Down Disabled Disabled
7 Up 1G/Full Disabled Disabled
8 Down Down Disabled Disabled
set powersaving
Syntax:
set set powersaving <0|1>
Description:
To set power saving.
Argument:
port: 1,5-7, available from 1 to 8
0: Disable, 1: Enable
Possible value:
: 1 to 8
:0: Disable, 1: Enable
Example:
SM8P-SFP(port)# set powersaving 2 1 SM8P-
SFP(port)#
show config
Syntax:
show config
Description:
To display the each port’s configuration information.
Argument:
None.
Possible value:
None.
Example:
SM8P-SFP(port)# show config
Speed/ Flow Maximum Excessive
Port Duplex Control Frame Collision Description
---- --------- -------- ------- --------- --------------------------------
1 Auto Disabled 9600 Discard
2 1G/Full Disabled 9600 Discard
3 Auto Disabled 9600 Discard
4 1G/Full Disabled 9600 Discard
5 1G/Full Disabled 9600 Discard
6 Auto Disabled 9600 Discard
7 Auto Disabled 9600 Discard
8 Auto Disabled 9600 Discard
show detail-counter
Syntax: