American Fibertek SM8P-SFP - Manual (Page 145)

135 Rev.A1
18-May-11
Specific: According to following ICMP code value setting for ingress
classification
ICMP Code Value:
Range: 0-255
IP Parameters: (Frame Type = IPv4 and IP Protocol Filter = UDP)
Source Port Filter:
Range: Any / Specific / Range
Any: Including all UDP source ports
Specific:
According to following Source Port No. setting for ingress
classification
Range:
According to following Source Port Range setting for
ingress classification
Source Port No.:
Range: 0-65535
Source Port Range.:
Range: 0-65535
Dest. Port Filter:
Range: Any / Specific / Range
Any: Including all UDP destination ports
Specific:
According to following Dest. Port No. setting for ingress
classification
Range:
According to following Dest. Port Range setting for ingress
classification
Dest. Port No.: (Destination Port Number)
Range: 0-65535
Dest. Port Range.: (Destination Port Range)
Range: 0-65535
IP Parameters: (Frame Type = IPv4 and IP Protocol Filter = TCP)
Source Port Filter:
Range: Any / Specific / Range
Any: Including all TCP source ports
Specific:
According to following Source Port No. setting for ingress
classification
Range:
According to following Source Port Range setting for
ingress classification
Source Port No.: