Acer al200 - Manual (Page 13)

AL2002W
E-11
Standard OSD Operation
1. Press MENU key to activate the OSD menu, when OSD is not displayed.
2. Use Select key to move down through the menu cyclically. The parameter will be
highlighted when selected.
3. Then use + or - to increase or decrease the value of the parameter, or make selection
between different options.
4. To quit the OSD screen at any time during the operation, press MENU key. If no keys
are pressed for a time period, the OSD automatically disappears.
5. When OSD is not displayed, press + key to start Auto-Adjust.
6. When OSD is not displayed, press key to switch Analog and Digital mode. (Only
Dual-Input Model)
OSD Function Description
-------------------------------------------------------------
·
Brightness To increase or decrease the brightness.
· Contrast To increase or decrease the contrast.
· Auto Contrast Press “+” key to start auto analog contrast.
[When staying at Digital mode, Auto Contrast will be
disabled](Only Dual-Input Model)
-------------------------------------------------------------
·
Color Temperature Press “-” or “+” to select 5000, 6500, 7500, 8200, 9300
and USER. Only when selecting USER, you can make
adjustments to the R/G/B content, otherwise not.
-------------------------------------------------------------
· Horizontal Size To increase or decrease the size of image.
· Fine To increase or decrease the snow noise of the image.
· Left / Right To move the screen toward left or right.
· Down / Up To move the screen upward or downward.
When staying at Digital mode, this page will be disabled.(Only Dual-Input Model)