ALESIS DEQ230D - Manual (Page 46)

3
Basics of Equalization
44
Setup mode
This is where you will find some of the features that govern the
way the DEQ230 operates in the other modes. They are what you
would call "Global" settings, in that their status is not stored with a
program. No matter which program you call up, these settings will
not change. And since they make such a big difference in how the
unit works, they have been "tucked away" so they won’t be altered
accidentally.
To access Setup mode, first you must turn off the DEQ230. Then
turn the unit back on, wait until you see the letters “DEQ230” in
the display, and then hold down the [STORE] button. After a
couple of seconds you will see the word "SETUP" appear in large
letters above Channel A‘s [BAND SELECT] buttons. Then the
LEDs over Channel A will read "M. LVL," and the LEDs over
Channel B will read "+00."
The first twelve [BAND SELECT] buttons of Channel A are
used to select between the different functions in Setup mode. They
are:
Item (button) Function Displayed Options Default
Value
1 (25 Hz) Master Level M. LVL +/- 6 dB 0 dB
2 (31.5 Hz) Release Edit Group REL E.G. Off/On On
3 (40 Hz) Audition Auto AUD AUTO Off/On On
4 (50 Hz) Edit Time Out EDIT T.O. Off/On Off
5 (63 Hz) Lock LOCK Off/On Off
The following functions are available on the DEQ230D only.
6 (80 Hz) MIDI Channel MIDI CH All, 1-16 ALL
7 (100 Hz) MIDI Program Chg PRG CHG Off/On On
8 (125 Hz) Sys-Ex Transmit SND SYX Send? N/A
9 (160 Hz) Sys-Ex Receive RCV SYX Waiting N/A
10 (200 Hz) MIDI Out/Thru Select MIDI O/T Out/Thru Thru
11 (250 Hz) Sample Rate Select INT CLOCK 44.1/48 48
12 (315 Hz) Force Analog Input INPUT SRC Auto/Analog Auto
Note that as you switch from one function to the next that the
Numeric LED Display will change to show the number of the
selected function.
The [STORE] button may be
used to cycle through the
functions also.
To return to Program mode
from Setup mode, press the
[LINK/EXIT] button or turn
the DEQ230 off and back on.