STEINEL HIPURFORMER - Manual (Page 4)

The HiPURformer™ Adhesive Applicator has been specially designed for use with
HiPURformer™ polyurethane reactive hot melt adhesive cartridges. HiPURformer™
adhesives are extremely versatile and offer many advantages over traditional hot melts.
• High-strength, permanent bonds
• Fast set times: range from 30 seconds–5 minutes*
• Bonds a wide variety of materials: wood, ceramic, metal, leather, textiles, marble,
PVC, plastic and many other substrates
• Interior/Exterior use: resists temperatures from -20°F to +275°F
• Waterproof and weatherproof
• UV indicator for easy clean-up
• Solvent free and nonflammable
• Greatly reduces the need for mechanical fasteners
• Adhesive is removable by heating to 280°F. with a hot air gun. Bond will soften at
approximately 280°F., but adhesive will not flow or become liquid. DO NOT USE HEAT
GUNS WITH FLAMMABLE OBJECTS OR SUBSTRATES.
• Features and performance vary depending on the HiPURformer™ adhesive formula
selected. Please refer to the instructions accompanying the specific adhesive
cartridge purchased.
*Set times may vary with application temperature, ambient temperature, thermal
conductivity and temperature of the substrates.
LIMITATIONS:
• Not for continuous submersion or use below the waterline.
• Not for use on copper or metal alloys containing a high percentage of copper.
ABOUT HiPURformer™ POLYURETHANE REACTIVE HOT MELT ADHESIVES
Wood to Wood
30-Second Set Time
Multi-Purpose
75-Second Set Time
Multi-Purpose
5-Minute Set Time
Wood to Wood
60-Second Set Time
4