Asus USB-N13 - Manual (Page 25)

3. Click Survey to scan for Ad Hoc
nodes. Select the node you want to
communicate with and click Connect.
4. If the encryption settings of your
network adapter are different from
those of the other Ad Hoc nodes, you
are prompted to make the encryption
of the two nodes identical. Click Apply
to activate the settings.
5. Click Status to view the association
state. If connection is established, the
box shows “ Connected - xx:xx:xx:xx:
xx:xx”.
6. Click the Connection tab to view the
signal strength. Click OK to exit the
utility.
ASUS Network adapter 2
Chapter 2 - Installation
Chapter 2 Installation