Asus USB-N13 - Manual (Page 18)

6. WPS Wizard is completed. Click Save or print settings for future reference or
Save settings to a USB flash drive to add other devices to the network. Click
Finish to close the WPS Wizard.
Note: For more details on adding devices to the network using a USB
flash drive, refer to the section Adding network devices using a USB
flash drive.
Using the PIN code on an unconfigured router
To use the PIN code on an unconfigured router:
1. Follow steps 1-3 in
Connecting via the PIN code.
2. If your selected router's status is Unconfigured, the WPS Wizard screen below
appears. Key in the PIN code in this screen. Click Next.
Chapter 2
18 ASUS Network adapter
Chapter 2 - Installation
Installation