Asus WL-600g - Manual (Page 6)

WL-600g Wireless ADSL2/2+ Home Gateway Quick Start Guide
4
Quick setup
Log onto the WL-600g configuration page
1. Type 192.168.1.1 into the address box of your Web browser and press Enter.
2. A login window appears for user name and password. The default username is
admin, password is admin (in lower case).
3. After logging in, you can see the WL-600g configuration page.
ADSL setup
1. By default, the Quick Setup page pops up. The Quick Setup Wizard automatically
detects your ADSL connection type.
2. If ADSL connection is detected, the next page shows your ADSL connection type.
If your ADSL connection is not detected, click Manual Setting to manually
set up WL-600g. Refer to Page 6-8 for manual setting instruction.
-- If your connection type is PPPoE or PPPoA
For dynamic IP users, input your user name and password then click Next.
For static IP users, check Use Static IP Address and input your IP address,
then click Next.
If your actual connection is not PPPoE or PPPoA, click Manual Setting to
manually set up WL-600g. Refer to Page 6-8 for manual setting instruction.