Asus K8S-MX - Manual (Page 54)

2-18 Chapter 2: BIOS Setup
HyperTransport Configuration
HT Width [ 8x16 BIT]
Allows selection of HyperTransport upstream data width.
Configuration options: [8x8 BIT] [16x16 BIT] [16x8 BIT] [8x16 BIT]
HT Speed [800 MHz]
Allows frequency selection of HyperTransport transfer from K8 CPU to AGP.
Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz]
HT Tristate Enable [Disabled]
Enables or disables the HyperTransport Tristate that enables the tristate link during
the disconnected state of an LDTSTOP. Configuration options: [Disabled] [Enabled]
CRC Flood Enable [Disabled]
Enables or disables the CRC Flood that enable the generation of synchronized
packets on CRC Error. Configuration options: [Disabled] [Enabled]
HyperTransport Configuration
HT Width [ 8x16 BIT]
HT Speed [800 MHz]
HT Tristate Enabled [Disabled]
CRC Flood Enable [Disabled]
MPS Configuration
MPS Revision [1.4]
Sets the MPS revision value. Configuration options: [1.1] [1.4]
MPS Revision [1.4]