GE ZV900SLSS - Manual

Specification Revised 6/11 130666
ZV900SL
GE Monogram ® 36" Glass Canopy Wall-Mounted Hood
*Height
to
Ceiling
20-7/16"
3-1/4"
35-7/8"
This vent hood may be installed onto a wall and vented
to the outdoors, or it can be installed for recirculating
operation. All necessary parts for recirculating operation
are supplied with the hood. No kits required. Must use an
8" round duct.
A decorative duct cover is provided to cover the duct
from the top of the hood to a 7'11" to 9'5" ceiling.
Accessories:
An optional stainless steel duct cover is available for 9'5"
to 10'5" ceiling heights. Order ZX90010 optional duct cover
at the same time as the vent hood and have on site
before installation.
For answers to your Monogram, ® GE Profile ™ or
GE ® appliance questions, visit our website at
geappliances.com or call GE Answer Center ®
service, 800.626.2000.
Dimensions and Installation Information (in inches)
* The supplied duct cover
fits 8 ft. to 9’5" ceiling
heights. Order ZX90010 for
9'5" to 10'5" ceiling heights.
Listed by
Underwriters
Laboratories
Dimensions and Clearances:
The vent hood should be installed 24" min. and 30" max.
above the cooking surface. The cooking surface should be at
least 36" above the floor. Installation will be easier if the vent
hood is installed before the range or cooktop/countertop
is installed.
This hood can be installed over a Monogram electric or gas
cooktop. It cannot be installed over a Monogram professional
cooktop or range.
Installation Information: Before installing, consult
installation instructions packed with product or available
on monogram.com for current dimensional data.
Note: Installation height should be measured from the
cooking surface to the outer glass sides.
24" Min.
30" Max.
36" Min.
The vent hood must be installed 24" min. and 30" max. above
the cooking surface depending on the ceiling height.