GE ZBD1850NII - Manual (Page 2)

NOTES
24"
(61.0)
min cutout depth
6"
(15.2)
4"
(10.2)
17 5/8"
(44.8)
Min
cutout width
18"
(45.7)
Max
cutout width
5"
(12.7)
5"
(12.7)
6"
(15.2)
4"
(10.2)
17 1/2"
(44.5)
ELECTRIC/
WATER
FLUSH CUTOUT INSTALLATION
INSTALLATION CUTOUT FRONT VIEW
CUSTOM PANEL
ELECTRIC/
WATER
32 1/2"
(82.55) min
underside of
counter to floor
Can be adjusted
up to 35" (88.9)
26 13/16"
(68.0)
ZBD1850NII
INSTALLATION
A The dishwasher drain
hose must be no more
than 10 feet in length
for proper drainage.
B A reduced-height
installation (32-1/2"
min.) beneath a 34"
countertop can be
accomplished by
screwing in the rear legs
flush with the bottom
support, removing the
front leveling legs and
adding shims to level.
C Water and electrical
must be routed through
the back wall shown in
shaded area.
D To prevent siphoning,
an air gap or high drain
loop must be used.
E A custom panel
installation template
(Pub. No. 31-30244)
is available from
GE Parts and
Accessories
(US 800.626.2002,
Canada 800.561.3344).
Product Specification Created 3/14
C
C
E
GE Monogram ® 18" Dishwasher ZBD1850NII