GE ZBD9900RII - Manual (Page 16)

16
Appliance Installation Checklist
• Remove packaging and check for cosmetic damages.
• Remove the information packets from inside the dishwasher.
• Attach any accessories as required by the installation. Fill strips, wooden door
panels, accessory door panels...
• Attach the drain line using the largest section of the disposer boot allowable.
Leave the high loop in place.
• Attach the PEX fill hose. Don’t forget to use the O-ring.
• Plug the dishwasher into the wall.
• Turn on the water and check the fill line connections for leaks.
• Slide the unit into the cabinet and level the machine front to rear, and left to
right.
• Mount the unit to the cabinet.
• Turn the power to the unit on and start a cycle. Make sure there are no drain
leaks.
• Show the customer their warranty card, and help them locate the model and se-
rial number on the unit.
• Leave all user books for consumer.
INSTALLATION CHECK LIST