GE ZV800SJSS - Manual (Page 2)

zv800SJ/BJ – GE Monogram ™ 36" Chimney Hood
Specification Revised 6/11
130664
Wall Mount Installations
These hoods may be installed onto a wall or below a wall cabinet.
• Telescopic duct covers are provided to conceal the ductwork,
running to the ceiling.
• This hood can be installed for recirculation operation. No
kits required.
Installation Below A Wall Cabinet
Order a cabinet that is at least 20" high from the bottom frame to the
inside top. The cabinet must be at least 12" deep.
• The hood installation height is determined by the ceiling height.
• The hood installation height must be 24" Min. above the cooking
surface.
Listed by
Underwriters
Laboratories
For answers to your Monogram, ® GE Profile ™ or
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center ® service,
800.626.2000.
36” Min.
24” Min.
30” Max.
24” Min.
*20” Min.
The vent hood must be installed 24" min. and 30" max. above the
cooking surface. The hood installation height, from the cooking
surface to the bottom of the hood, depends upon ceiling height.
Installation Below a Cabinet
* The cabinet must measure at least 20" from the bottom frame to the
inside top. The hood housing will occupy the interior cabinet space.