ASKO D3 User Manual

Page 11

Page 11

4-inc

4-inch

h T

Toe Kic

oe Kic

oe Kick Installa

k Installa

k Installations

tions

Custom panel extends to cabinet top

One installation option for a 4” toe kick is to extend the
custom panel to the cabinet top (as illustrated below).

D3252XLFI,

D3252XLFI, D3532XLFI,

D3532XLFI,

D3532XLFI, AND D3532XLFIWS CUST

AND D3532XLFIWS CUST

AND D3532XLFIWS CUSTOM P

OM P

OM PANEL

ANEL

INST

INSTALLA

ALLA

ALLATION OPTIONS

TION OPTIONS

6-inc

6-inch

h T

Toe Kic

oe Kic

oe Kick Installa

k Installa

k Installations

tions

XL units are not designed to accomodate a 6 inch
toe kick installation. If you need a 6 inch toe kick
installation, you should install an Asko standard
tank dishwasher model D3122 or D3252FI.

One-Piece Custom

Door Panel

A one-piece custom door panel
with a curved handle is now
available for the FI dishwashers.
This door is available in stainless
steel (as shown), black, and white.
To order this door panel, contact
your dealer.

These doors are designed for 4” toe
kick installations.

Panel extends from toe kick to cabinet top

4-inch toe kick

30 1/8"

765 mm

23-1/2"

597 mm

ADJUSTING THE DOOR SPRINGS

After you install the custom panel,
make sure the door stays in place at
any angle. If it tends to fall down, pull
out the machine and tension the door
springs on the sides of the machine
by moving them one hole farther back
or by twisting the spring to make it
shorter. If that doesn’t resolve the
problem, you may need to purchase
the heavy-duty door springs (part
number 8076163-77).

Locate the screw heads in the keyholes and push the wood panel to
one side and align with the door. (Figure 5)

Clamp the wood panel to the dishwasher door to keep it securely in
place.

Open the dishwasher door and screw the wood panel into position
with the four long screws, two on either side. (Figure 6)

MOUNTING

MOUNTING THE

THE

THE W

WOOD P

OOD P

OOD PANEL

ANEL