Airlink101 AR695W User Manual

Page 3

Text mode
Original mode

Step 3

With another network cable, connect one end of the cable to your

computer’s Ethernet port and connect the other end to one of the LAN ports
of the router. (After setup finishes, you can remove the network cable
between the computer and router if you want to use wireless connection.)

Step 4

Plug the power adapter to the router and connect it to an electrical

outlet. Make sure the power switch at the back is “On”.

Step 5

Power on your computer.

Step 6

Check LEDs of the router: make sure Status, WAN, Wireless, and

the LAN port that the computer is connected to are lit. If one or more LEDs
are not lit, please refer to Section 4 Troubleshooting.

Step 7

Insert the Setup CD into CD-ROM drive.

Step 8

When the autorun menu pops up, click EZ Setup Wizard.