Installation instructions, Installing the cooktop, Important – GE JP256BMBB User Manual
Page 17: Installing the junction box, Attach foam tape, Locate mounting parts, Protect surface of cooktop
Installation Instructions
1
INSTALLING THE JUNCTION BOX
Install an approved junction box where it will
be easily reached through the front of the cabinet
where the cooktop will be located. The cooktop
conduit is 58s long.
IMPORTANT:
The junction box must be
located where it will allow considerable slack in
the conduit for serviceability.
INSTALLATION OVER GSM2100 DISHWASHER
The center of the junction box should be 5sto7s
below the cooktop lip, so it does not interfere with
the dishwasher, installation or operation.
Electrical connections must be made before placing
the cooktop into the cutout.
INSTALLING THE COOKTOP
3
ATTACH FOAM TAPE
Apply the foam tape around the outer edge of
the glass. Do not overlap the foam tape.
4
LOCATE MOUNTING PARTS
Start one screw through the bracket and
into the cooktop (both sides). Do not tighten. Turn
the bracket inward to avoid interference when
dropping the cooktop into the countertop.
2
PROTECT SURFACE OF COOKTOP
Place a towel or tablecloth onto the
countertop. Lay the cooktop upside down
onto the protected surface.
Bottom of Cooktop
Cloth under Cooktop
Bottom of Cooktop
Foam Tape
Cooktop
Glass
Install junction box so
that it can be reached
through the front of the
cabinet.
*5s
Min.
*7d Max. when
installing over
GSM2100
Dishwasher
17