GE PP912SMSS - Manual (Page 14)

To order ceramic cooktop cleaner and the
cooktop scraper, please call our toll-free
number:
National Parts Center
800.626.2002.
Ceramic Cooktop Cleaner . . # WX10X300
Ceramic Cooktop Scraper . # WX10X0302
Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . # WB64X5027
(Kit includes cream and cooktop scraper)
Cleaning Pads for
Ceramic Cooktops . . . . . . . . . # WX10X350
14
Cleaning the glass cooktop.
Turn off all surface elements. Remove hot
pans.
Wearing an oven mitt:
a. Use a single-edge razor blade scraper
(ceramic cooktop scraper) to move the
spill to a cool area on the cooktop.
b. Remove the spill with paper towels.
Any remaining spillover should be left until
the surface of the cooktop has cooled.
Don’t use the surface elements again until
all of the residue has been completely
removed.
NOTE: If pitting or indentation in the glass
surface has already occurred, the cooktop
glass will have to be replaced. In this case,
service will be necessary.
Damage from Sugary Spills and Melted Plastic
Our testing shows that if
you are cooking high sugar
mixtures such as jelly or
fudge and have a spillover,
it can cause permanent
damage to the glass surface
unless the spillover is
immediately removed.
Be careful not to slide pots and pans
across your cooktop. It will leave metal
markings on the cooktop surface.
These marks are removable using the
ceramic cooktop cleaner with the cleaning
pad for ceramic cooktops.
If pots with a thin overlay of aluminum or
copper are allowed to boil dry, the overlay
may leave black discoloration on the
cooktop.
This should be removed immediately
before heating again or the discoloration
may be permanent.
WARNING:
Carefully check
the bottom of pans for roughness that would
scratch the cooktop.
Metal Marks and Scratches
To Order Parts
Glass surface—potential for permanent damage .