GE GTDP740EDWW - Manual (Page 16)

Installation Instructions
:KHQWKHFRYHUFDSVDQGGRRUKDQGOHLQSODFHPRXQW
the inner door back into the outer door with the screws
UHPRYHGLQVWHS0DNHVXUH\RXPRXQWWKHKLQJHVRQ
the side opposite the handle.
Remove and swap the 2 cover caps and door handle
from the outer door:
A. Squeeze the tabs on the inside of the door handle
FOLSV3XVKFOLSVWKURXJKWKHRXWHUGRRU
B. Squeeze the tabs on the inside of the cover caps.
3XVKFDSVWKURXJKWKHRXWHUGRRU
C.3XVKWKHGRRUKDQGOHFOLSVLQWRWKHRSHQLQJVRQWKH
RSSRVLWHVLGHRIWKHRXWHUGRRUPDNLQJVXUH\RXÀLS
the handle so it curves to the inside.
D.3XVKWKHFRYHUFDSVLQWRWKHRSHQLQJVRQWKHRXWHU
door where the handle was removed.
Edge
screws
Door
hinge
screws
Inside screws
Inside screws
Handle
,QVWDOOWKHSODVWLFFDSVUHPRYHGLQVWHSLQWRWKH
right side front panel holes.
NOTE:7RUHWXUQWKHGRRUWRWKHRULJLQDOVHWXSIROORZ
WKHVHLQVWUXFWLRQVVZDSSLQJ´OHIWµDQG´ULJKWµ
Mount the assembled door on the 2 upper left side hinge
screws installed in step 2.
Move the hinge screws loosened in step 3 into the lower
OHIWVLGHVFUHZKROHVDQG¿UPO\WLJKWDOOVFUHZV