beautypg.com

3 removing the sata backplane, Removing the sata backplane -24 – Asus TW300-E5/PI4 User Manual

Page 44

background image

Chapter 2: Hardware setup

2-24

To remove the SATA backplane

1. Remove the right side cover first.

Disconnect all SATA cables and

power cables connected to the

SATA backplane.

2.8.3

Removing the SATA backplane

Remove all hard drives before

removing the SATA backplane.

2. Remove all the six screws on the

back of the SATA backplane holder

with a screwdriver.

3. Take out the SATA backplane with

the backplane holder and place on

a flat surface. The TW300-E5/PI4

Workstation uses only the four SATA

HDD connectors labelled DEVICE1-

4.

4

3

2

1

See also other documents in the category Asus Computers: