2 installing an additional optical drive, Installing an additional optical drive -16 – Asus TW300-E5/PI4 User Manual

Page 36

Chapter 2: Hardware setup

2-16

3. Carefully remove the front panel

cover, and then set aside.

2.6.2

Installing an additional optical drive

Configure your optical drive as Master/Slave device before installing it to the

drive bay. Refer to the optical drive documentation for details.

To install an additional optical drive

1. Select the drive bay you intend to

use. Push the knock down metal

cover in and out of the chassis until

it is removed.

Take extra care when removing

the knock down metal cover.

Use tools such as a screw driver

to bend and remove the metal

cover to avoid physical injury.