Nilfisk-ALTO SCRUBTEC 651BCL - Manual (Page 78)

16 SCRUBTEC 653B – 653BL – 651BCL – 661BL 9097058000(2)2009-10 A
ENGLISH USER MANUAL
Types of brushes available
305 mm-models 530 mm-models
PROLENE PROLENE
MIDLITE GRIT 180 MIDLITE GRIT 180
MIDGRIT 240 MIDGRIT 240
PROLITE PROLITE
UNION MIX UNION MIX
Brush/pad application guide (suggestions only)
Models MIDLITE GRIT 180 MIDGRIT 240 PROLENE PROLITE UNION MIX
General cleaning:
Concrete
Terrazzo fl oor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Polishing:
Rubber tiles
Marble
Vinyl tiles
Cylindrical brush installation/removal (only for SCRUBTEC 651BCL)
Turn the ignition key (80) to “0”. 1.
Lift the cylindrical brush deck by pressing the pedal (11). 2.
Remove the handwheels (A, Fig. 3) and the lids (B) by pushing them downwards and pressing on the handwheels. 3.
Install the cylindrical brushes (C). 4.
The cylindrical brushes can be installed on either sides.
Install the lids (B) and fasten them with the handwheels (A).
5.
To remove the cylindrical brushes, perform steps 1 to 5 in the reverse order. 6.
A
B
C D
E
A
C
B
S311318
Figure 3