Removing drivelock protection, Device security – HP Compaq Presario V5000 CTO Notebook PC User Manual
Page 144
Removing DriveLock protection
To remove a DriveLock password:
1.
Open the Setup Utility by turning on or restarting the computer, and then pressing
f10
while the
setup message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select one of the following options:
●
If the computer has one hard drive, select Security > DriveLock Password, and then
press
enter
. (This option is called Primary DriveLock Password on models with two hard
drives.)
– or –
●
If you want to remove the DriveLock protection on the secondary hard drive (select models
only), select Security > Secondary DriveLock Password, and then press
enter
.
3.
Type your current password in the Enter Current Password field, and then press
enter
3 times.
(Pressing
enter
at each of the remaining password fields indicates that you are removing, not
changing, your password.)
4.
When the setup notice message is displayed, press
enter
to save your changes.
5.
To save your preferences and exit the Setup Utility, press
f10
, and then follow the instructions
on the screen.
Your preferences go into effect when the computer restarts.
Device security
From the Device Security menu in the Setup Utility, you can disable or enable a system device, such
as an optical drive.
To disable or enable system devices:
1.
Open the Setup Utility by turning on or restarting the computer, and then pressing
f10
while the
setup message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Security > Device Security, and then press
enter
.
3.
Use the arrow keys to select a device. Then
●
To disable a device, press
f5
or
f6
to change the field for the device to Disable, and then
press
enter
.
●
To enable a device, press
f5
or
f6
to change the field for the device to Enable, and then
press
enter
.
4.
When a confirmation prompt with your selection is displayed, press
enter
.
5.
To save your preferences and exit the Setup Utility, press
f10
, and then follow the instructions
on the screen.
Your preferences go into effect when the computer restarts.
134
Chapter 11 Security
ENWW