HP ProLiant BL495c G6 Server-Blade - Manual (Page 43)

• Reconfiguring one or more logical drives
• Viewing the current logical drive configuration
• Deleting a logical drive configuration
• Setting the controller to be the boot controller
If you do not use the utility, ORCA will default to the standard configuration.
For more information regarding array controller configuration, refer to the controller user guide.
A uses, refer to the HP ROM-Based
up
Re-enteri
e-enter the server serial number and the product ID.
ey to access RBSU.
ptions menu.
s displayed:
The serial number is loaded into the system
qualified service personnel. This value should
sis.
4. Press the Enter key to clear the warning.
press the Enter key.
Enter key.
.
Man
Autom
es the system to restart when a catastrophic operating system error occurs, such
as a blue screen, ABEND, or panic. A system fail-safe timer, the ASR timer, starts when the System
r, also known as the Health Driver, is loaded. When the operating system is
y, the system periodically resets the timer. However, when the operating system fails,
For more information regarding the default configurations that ORC
Set Utility User Guide on the Documentation CD.
ng the server serial number and product ID
After you replace the system board, you must r
1. During the server startup sequence, press the F9 k
2. Select the System O
3. Select Serial Number. The following warning i
WARNING! WARNING! WARNING!
during the manufacturing process and should NOT be modified. This option
should only be used by
always match the serial number sticker located on the chas
5. Enter the serial number and
6. Select Product ID.
7. Enter the product ID and press the
8. Press the Esc key to close the menu
9. Press the Esc key to exit RBSU.
10. Press the F10 key to confirm exiting RBSU. The server will automatically reboot.
agement tools
atic Server Recovery
ASR is a feature that caus
Management drive
functioning properl
the timer expires and restarts the server.
ASR increases server availability by restarting the server within a specified time after a system hang or
shutdown. At the same time, the HP SIM console notifies you by sending a message to a designated
pager number that ASR has restarted the system. You can disable ASR from the HP SIM console or
through RBSU.
Software and configuration utilities 43