HP ProLiant BL495c G6 Server-Blade - Manual (Page 17)

Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network
interconnect devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-thru modules
and switch modules. For more information about interconnect module options, see the HP website
( http://www.hp.com/go/bladesystem/interconnects ).
Installing a server blade
CAUTION: To prevent improper cooling and thermal damage, do not operate the enclosure
unless all bays are populated with a component or a blank.
1. Remove the device bay blank.
2. Remove the enclosure connector cover.
Setup 17