HP Deskjet 3745 Color Inkjet Printer - Manual (Page 18)

• Paper Size: The appropriate paper size
• Orientation: The appropriate orientation
2. Click OK.
3. Open the
Print dialog box.
4. Select the Paper Type/Quality panel, and then select the following settings:
• Paper Type: Scroll down and select Photo paper, and then click the
appropriate paper type.
• Print Quality: Best or Maximum dpi.
5. If you want to use them, set the HP digital photography options .
6. Select any other print settings that you want, and then click Print.
6.9 Borderless photos
Guidelines
• To print borderless photos, use 4 x 6 inch photo paper with a 0.5 inch tab (10
x 15 cm with 1.25 cm tab); the photo prints without borders on three sides and
with a small border on the bottom edge that you tear off to make the photo
completely borderless.
• To learn how to use the photo printing features, see the photo enhancing page.
• Use HP Everyday Photo Paper, Semi-gloss to save money and ink when
printing photos.
• Verify that the photo paper that you are using is flat. For information about
preventing photo paper from curling, see the photo paper storage instructions .
• Do not print borderless photos in ink-backup mode . Always have two print
cartridges installed in the printer.
• Open the file in a software program and assign the image size. Ensure that the
size corresponds to the paper size on which you want to print the image.
• Do not exceed the paper tray capacity: Up to 15 sheets.
Preparing to print
1. Slide the paper guide to the left.
2. Place the photo paper, with the side to be printed on facing down and the short
edge pointing towards the printer, in the right side of the tray. If you are using
photo paper that has a tear-off tab, verify that the tab is pointing away from the
printer. Push the paper into the printer until it stops.
HP Deskjet 3740 series printer User's Guide
18