Starting up using the recovery menu, Updating the system using a file-based update – HP SlateBook 14-p010nr PC User Manual
Page 19
Starting up using the recovery menu
If your computer is unable to boot into the operating system, you can perform a system recovery by
directly accessing the Recovery menu.
1.
Turn off your computer and plug in the AC adapter.
2.
To boot into the Recovery menu, press and hold the volume down key and then press the power
button. Hold the volume down key until the HP logo is displayed.
3.
Move the arrow up or arrow down key to highlight wipe data/factory reset, and then press
enter
to confirm the selection.
4.
Move the arrow up or arrow down key to highlight Yes — delete all user data, and then press
enter
to confirm the selection.
5.
Move the arrow up or arrow down key to highlight reboot system now, and then press
enter
to
confirm the selection.
Updating the system using an OTA (over-the-air) update
1.
Turn off your computer and plug in the AC adapter.
2.
Turn on your computer, and connect to the Internet.
3.
To access Settings, touch the All Apps icon, and then touch Settings.
4.
Under About SlateBook, touch System updates, and then touch Check now.
5.
Follow the on-screen instructions to finish the process. The system may reboot as updates are
applied.
Updating the system using a file-based update
1.
Turn off your computer and plug in the AC adapter.
2.
Download the appropriate Softpaq fro
3.
Locate update.zip and copy it to a microSD card.
4.
Turn off the computer, and then insert the microSD card containing the update.zip file.
5.
To power on the computer, press and hold the volume down key and the power button.
6.
Select Apply update from SD.
7.
Follow the on-screen instructions to finish the process and reboot the system.
Starting up using the recovery menu 15