HP mt41 Mobile Thin Client - Manual (Page 29)

8. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE: See the image on the battery bay to determine which way the SIM should be inserted
into your computer.
NOTE: To remove a SIM, press in on the SIM, and then remove it from the slot.
9. Replace the service door. See Replacing the service door on page 45 .
10. Replace the battery. See Inserting a battery on page 34 .
NOTE: HP Mobile Broadband will be disabled if the battery is not replaced.
11. Reconnect external power.
12. Reconnect external devices.
13. Turn on the computer.
Using GPS (select models only)
Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites
deliver location, speed, and direction information to GPS-equipped systems.
For more information, see the HP GPS and Location software Help.
Connecting to a wired network
Connecting to a local area network (LAN)
Use a LAN connection if you want to connect the computer directly to a router in your home (instead
of working wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an 8-pin, RJ-45 network cable.
To connect the network cable, follow these steps:
1. Plug the network cable into the network jack (1) on the computer.
Connecting to a wired network 19