Managing an administrator password, Entering an administrator password, Power-on password – HP Mini 2102 User Manual
Page 50: Managing a power-on password
Managing an administrator password
To set, change, or delete this password, follow these steps:
1.
Open Setup Utility by turning on or restarting the computer, and then pressing
f10
while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Security > Set Administrator Password, and then press
enter
.
●
To set an administrator password, type your password in the Enter New Password and
Confirm New Password fields, and then press
enter
.
●
To change an administrator password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press
enter
.
●
To delete an administrator password, type your current password in the Enter Password
field, and then press
enter
4 times.
3.
To save your changes and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes.
Your changes go into effect when the computer restarts.
Entering an administrator password
At the Enter Password prompt, type your administrator password, and then press
enter
. After 3
unsuccessful attempts to enter the administrator password, you must restart the computer and try
again.
Power-on password
Your power-on password prevents unauthorized use of the computer. After this password is set, it
must be entered each time you turn on or restart the computer, or exit Hibernation. A power-on
password is not displayed as it is set, entered, changed, or deleted.
Managing a power-on password
To set, change, or delete this password, follow these steps:
1.
Open Setup Utility by turning on or restarting the computer, and then pressing
f10
while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Security > Set Power-On Password, and then press
enter
.
●
To set a power-on password, type your password in the Enter New Password and
Confirm New Password fields, and then press
enter
.
●
To change a power-on password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press
enter
.
●
To delete a power-on password, type your current password in the Enter Current
Password field, and then press
enter
4 times.
3.
To save your changes and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes.
Your changes go into effect when the computer restarts.
42
Chapter 6 Security