HP Netserver L Server series - Manual (Page 29)

Chapter 4 Troubleshooting
23
f. Replace the NetServer cover.
g. Replace all power cords and power cables.
h. Turn on the monitor.
i. Turn on the server.
j. Check for error messages.
4. Run the HP NetServer Diagnostic Assistant Disk located on a flexible disk
mounted inside your HP NetServer in a plastic pouch.
Error Messages
If you get an error message, insert your HP Navigator CD-ROM into the
CD-ROM drive and press the Reset button on the front of the HP NetServer.
An error message utility will automatically display the error message and a
possible solution.
For a complete list of error messages and solutions see the HP NetServer
Information Assistant program on the HP Navigator CD-ROM. HP Information
Assistant runs on an HP Vectra or other PC running Windows 3.1 and above,
Windows 95 or Windows NT.