HP L1940T 19-inch LCD Monitor - Manual (Page 15)

Setting Up the Monitor
Selecting the Signal Connectors and
Cables
There are two signal input connectors:
■ VGA connector
■ DVI-D connector (available on select models)
The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected through the
On-Screen Display (OSD) feature by pressing the Menu button
on the monitor front bezel or by pressing the
+
button to enable
VGA signal input or the – button to enable DVI signal input.
Connecting the Monitor
Å WARNING: To reduce the risk of electric shock or damage to your
equipment: Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
Disconnect power from the monitor by unplugging the power cord
from the electrical outlet.
Do not place anything on power cords or cables. Arrange them so
that no one may accidentally step on or trip over them. Do not pull on
a cord or cable. When unplugging from the electrical outlet, grasp
the cord by the plug.
User Guide 3–3