HP LaserJet 9050 Printer series - Manual (Page 35)

ENWW AutoSend 29
AutoSend
Use the AutoSend screen to send product-configuration and supplies-usage information
periodically to your service provider. This feature establishes a relationship with Hewlett-Packard
Company or another service provider to provide you with services that include, but are not
limited to, toner replacement, pay-per-page contracts, support agreements, and usage tracking.
The following illustration, table, and procedure describe how to use this screen.
With a permanent storage device installed, such as a hard disk, you can add up to twenty e-mail
addresses. (Without the permanent storage device, you can add one e-mail address.) The
following example is for a product that does have a permanent storage device installed.
1
3
4
2
6
5
Callout Area on the screen Information or capability that the area provides
EWS tabs and menus For more information, see “Navigating through the HP Embedded
Web Server” on page 5 .
Enable AutoSend Select this check box to turn on the AutoSend feature.
Send every [interval] Select the interval at which you want the product to send the
product configuration and supplies usage information to the
destinations that are configured in the E-Mail destinations field.
E-Mail destinations Save a list of up to 20 e-mail addresses to receive the
product-configuration information. Each e-mail address can be
up to 50 characters long.
1
2
3
4