HP StorageWorks 8B FC Entry Switch - Manual (Page 13)

13 HP StorageWorks Remote Switch Version 3.1.x/4.1.x User Guide
1
Remote Switch
This chapter provides the following information:
■ About Remote Switch , page 14
■ Installing Remote Switch , page 15
■ Using Remote Switch , page 17
■ Configuring a Remote Switch Fabric , page 18
■ Accessing the Switch using Telnet , page 18
Remote Switch is an optionally licensed product that runs on HP StorageWorks
SAN Switches, version 3.0.x/4.0.x or later.
The Remote Switch fabric functions with the aid of a “bridging device” or
network-bridge. The network-bridge supports both a Fibre Channel physical
interface as well as a secondary non-Fibre Channel FCIP physical interface.
Note: Remote Switch is supported when used with HP StorageWorks Data Replication
Manager (DRM) only.