Asus E2898 - Manual (Page 94)

4-24 Chapter 4: BIOS setup
DDR2 Channel A Ref Voltage / DDR2 Channel B Ref Voltage [Auto]
Allows you to set the DDR2 Controller/ChannelA/B Ref voltage.
Configuration options: Configuration options: [Auto] [DDR2_Vol/2] [DDR2_
Vol/2-30mv] [DDR2_Vol/2-20mv] [DDR2_Vol/2-10mv] [DDR2_Vol/2+10mv]
[DDR2_Vol/2+20mv] [DDR2_Vol/2+30mv]
4.4.4 NVIDIA GPU Ex [Disabled]
Enables or disables with the optimized NVIDIA Ex graphics driver.
Configuration options: [Auto] [Disabled]
1.2V HT Voltage [Auto]
Configuration options: [Auto] [1.20V] [1.25V] [1.30V]...[1.90V] [1.95V]
NB Core Voltage [Auto]
Configuration options: [Auto] [1.20V] [1.25V] [1.30V]...[2.70V] [2.75V]
SB Core Voltage [Auto]
Configuration options: [Auto] [1.50V] [1.55V] [1.60V] [1.65V] [1.70V] [1.75V]
[1.80V] [1.85V]
CPU VTT Voltage [Auto]
Configuration options: [Auto] [1.20V] [1.25V] [1.30V] [1.35V]...[1.50V] [1.55V]
DDRII Controller Ref Voltage [Auto]
Configuration options: [Auto] [DDR2_Vol/2] [DDR2_Vol/2-30mv] [DDR2_
Vol/2-20mv] [DDR2_Vol/2-10mv] [DDR2_Vol/2+10mv] [DDR2_Vol/2+20mv]
[DDR2_Vol/2+30mv]
4.4.5 SLI-Ready Memory [Disabled]
Allows you to select the SPD profile for SLI-Ready memory modules. The
configuration options may vary depending on the type of module you installed.
Configuration options: [Disabled] [Optimal] [High Performance] [High Frequency]
The following item becomes user-configurable when SLI-Ready Memory is set
to Enabled.
4.4.6 SLI-Ready Memory CPUOC [CPUOC 0%]
Configuration options: [CPUOC 0%] [CPUOC 1%]~[CPUOC 14%] [CPUOC MAX]