HP StorageWorks 16-EL SAN Switch - Manual (Page 77)

Switch Management
77 Web Tools Version 3.1.x/4.1.x User Guide
Beacon Button—Physically Locating a Switch in a Fabric
To physically locate a switch in a fabric, use the Beacon button as described in the
following steps.
1. Launch Web Tools by entering the IP address of the switch you wish to locate.
2. Highlight the switch in the Fabric Tree.
The selected switch appears in the Switch View.
3. Select the Beacon button on the switch View.
The LED lights on the selected switch light up and run back and forth across
the switch.
4. Look at the physical switches in your installation to locate the desired switch.