HP StorageWorks 16-EL SAN Switch - Manual (Page 115)

Switch Admin Window
115 Web Tools Version 3.1.x/4.1.x User Guide
About the Port Setting Tab
Use the Port Setting tab of the Administrative interface to perform functions such
as: disable/enable ports on the switch, set port speed to 1GB/2GB/Negotiate,
enable/disable Trunking, or name a port.
The port speed is displayed as follows:
■ 1G - 1 Gbit/sec
■ 2G - 2 Gbit/sec
■ N1 - Negotiated 1 Gbit/sec
■ N2 - Negotiated 2 Gbit/sec
Port Settings Tab Example
An example of the Port Settings Tab is shown in Figure 24 .