HP StorageWorks 16-EL SAN Switch - Manual (Page 111)

Switch Admin Window
111 Web Tools Version 3.1.x/4.1.x User Guide
Using the SNMP Tab to Set Trap Levels
Perform the following procedure to set trap levels.
1. Access the Switch Admin Window (see “ About the Switch Admin Window ”
on page 92).
2. Enter the admin user name and password.
3. Select the SNMP tab.
4. Select a Trap level from the drop-down menu. The level you select refers to
the Event level that will prompt a trap. See “ About the Switch Events Button ”
on
page 67
.
5. Click the Apply button.