HP Pavilion g4-2149se Notebook PC - Manual (Page 58)

To set your computer to receive automatic updates, you must first complete the Novell Customer
Center (NCC) Registration:
1. Select Computer > YaST.
2. Under the Other category, select Novell Customer Center Config.
3. Select Configure Now.
4. Check Hardware Profile, Optional Information, and Regularly Synchronize with the
Customer Center.
5. Select Next. The configuration utility will contact the server.
6. When the Manual Interaction Required window appears, select Continue. Your default
browser will open.
7. In your browser window, enter and confirm your email address, and then select Submit.
8. If you have an HP license number, enter it in the provided field. If not, leave the field blank.
Select Submit.
9. Select Continue. The registration will complete. When a message appears stating your
configuration was successful, select OK.
Once the NCC registration is complete, you can set your computer to receive automatic updates:
1. Select Computer > YaST > Online Update Configuration.
2. Check Automatic Online Update.
3. Select Finish.
Cleaning your computer
Cleaning your computer and external devices helps keep them in good working condition. If you don't
clean your computer, dust and dirt particles can build up.
CAUTION: Avoid using the following cleaning products to clean your computer:
Strong solvents, such as alcohol, acetone, ammonium chloride, methylene chloride, and
hydrocarbons, which can permanently damage the surface of the computer.
Cleaning the display, sides, and cover
Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Allow
the display to dry before closing the computer cover.
Use a pre-moistened germicidal wipe to clean the sides and cover. Fibrous materials, such as paper
towels, can scratch the computer.
NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and
debris.
48 Chapter 8 Maintaining your computer